 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| VCE IC = = 2500 V 50 A IGBT-Die 5SMX 12L2510 Die size: 12.4 x 12.4 mm Doc. No. 5SYA 1622-03 Sep 05 * * * * Low loss, rugged SPT technology Smooth switching for good EMC Large bondable emitter area Passivation: SIPOS and Silicon Nitride plus Polyimide Maximum rated values Parameter Collector-emitter voltage DC collector current Peak collector current Gate-emitter voltage IGBT short circuit SOA Junction temperature 1) 1) Symbol Conditions VCES IC ICM VGES tpsc Tvj VCC = 2000 V, VCEM 2500 V VGE 15 V, Tvj 125 C Limited by Tvjmax VGE = 0 V min max 2500 50 100 Unit V A A V s C -20 20 10 -40 125 Maximum rated values indicate limits beyond which damage to the device may occur per IEC 60747 - 9 ABB Switzerland Ltd, Semiconductors reserves the right to change specifications without notice. 5SMX 12L2510 IGBT characteristic values Parameter Collector (-emitter) breakdown voltage Collector-emitter saturation voltage Collector cut-off current Gate leakage current Gate-emitter threshold voltage Gate charge Input capacitance Output capacitance Reverse transfer capacitance Internal gate resistance Turn-on delay time Rise time Turn-off delay time Fall time 2) Symbol Conditions V(BR)CES VCE sat ICES IGES VGE(TO) Qge Cies Coes Cres RGint td(on) tr td(off) tf VCC = 1250 V, IC = 50 A, RG = 33 , VGE = 15 V, L = 2400 nH, inductive load VCC = 1250 V, IC = 50 A, RG = 33 , VGE = 15 V, L = 2400 nH, inductive load VCC = 1250 V, IC = 50 A, VGE = 15 V, RG = 33 , L = 2400 nH, inductive load, FWD: 1/2 5SLX12L2510 VCC = 1250 V, IC = 50 A, VGE = 15 V, RG = 33 , L = 2400 nH, inductive load Tvj = 25 C Tvj = 125 C Tvj = 25 C Tvj = 125 C Tvj = 25 C Tvj = 125 C Tvj = 25 C Tvj = 125 C Tvj = 25 C Tvj = 125 C Tvj = 25 C Tvj = 125 C VGE = 0 V, IC = 1 mA, Tvj = 25 C IC = 50 A, VGE = 15 V VCE = 2500 V, VGE = 0 V Tvj = 25 C Tvj = 125 C Tvj = 25 C Tvj = 125 C min 2500 2.0 typ max Unit V 2.5 3.1 2.9 100 V V A A nA V nC nF ns ns ns ns 1000 -500 5 510 7.8 0.4 0.13 5 380 390 255 265 690 790 320 350 28 500 7.5 VCE = 0 V, VGE = 20 V, Tvj = 125 C IC = 10 mA, VCE = VGE, Tvj = 25 C IC = 50 A, VCE = 1250 V, VGE = -15 ..15 V VCE = 25 V, VGE = 0 V, f = 1 MHz, Tvj = 25 C Turn-on switching energy Eon mJ 42 40 mJ 50 250 A Turn-off switching energy Eoff Short circuit current 2) ISC tpsc 10 s, VGE = 15 V, Tvj = 125 C, VCC = 2000 V, VCEM 2500 V Characteristic values according to IEC 60747 - 9 ABB Switzerland Ltd, Semiconductors reserves the right to change specifications without notice. Doc. No. 5SYA 1622-03 Sep 05 page 2 of 5 5SMX 12L2510 Mechanical properties Parameter Overall die L x W Dimensions exposed L x W (except gate pad) front metal gate pad thickness Metallization 3) 3) Unit 12.4 x 12.4 10.11 x 10.13 1.46 x 1.61 305 20 AlSi1 AlSi1 + TiNiAg 4 1.8 + 1.2 mm mm mm m m m LxW front (E) back (C) For assembly instructions refer to : IGBT and Diode chips from ABB Switzerland Ltd, Semiconductors, Doc. No. 5SYA 2033. Outline drawing G Emitter Note: all dimensions are shown in mm This is an electrostatic sensitive device, please observe the international standard IEC 60747-1, Chap. IX. This product has been designed and qualified for Industrial Level. ABB Switzerland Ltd, Semiconductors reserves the right to change specifications without notice. Doc. No. 5SYA 1622-03 Sep 05 page 3 of 5 5SMX 12L2510 100 90 80 125 C 70 60 IC [A] 50 40 30 20 10 VGE = 15 V 0 0 1 2 VCE [V] 3 4 5 IC [A] 25 C 100 VCE = 25 V 90 80 70 60 50 40 125 C 30 25 C 20 10 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 VGE [V] Fig. 1 Typical on-state characteristics Fig. 2 Typical transfer characteristics 0.20 0.18 0.16 0.14 Eon, Eoff [J] Eon, Eoff [J] 0.12 Eoff 0.10 0.08 0.06 0.04 0.02 0.00 0 25 50 75 IC [A] 100 125 150 VCC = 1250 V RG = 33 ohm VGE = 15 V Tvj = 125 C L = 2.4 H 0.10 0.09 Eon 0.08 0.07 0.06 0.05 0.04 0.03 0.02 0.01 0.00 0 20 40 60 80 100 120 140 RG [ohm] Eoff VCC = 1250 V IC = 50 A VGE = 15 V Tvj = 125 C L = 2.4 H Eon Fig. 3 Typical switching characteristics vs collector current Fig. 4 Typical switching characteristics vs gate resistor ABB Switzerland Ltd, Semiconductors reserves the right to change specifications without notice. Doc. No. 5SYA 1622-03 Sep 05 page 4 of 5 5SMX 12L2510 20 10 Cies VCC = 1250 V 15 VCC = 1800 V VGE = 0 V fOSC = 1 MHz VOSC = 50 mV VGE [V] 10 C [nF] 1 Coes 5 Cres IC = 50 A Tvj = 25 C 0 0.0 0.1 0.2 0.3 Qg [C] 0.4 0.5 0.1 0 5 10 15 20 VCE [V] 25 30 35 Fig. 5 Typical gate charge characteristics Fig. 6 Typical capacitances vs collector-emitter voltage ABB Switzerland Ltd, Semiconductors reserves the right to change specifications without notice. ABB Switzerland Ltd Semiconductors Fabrikstrasse 3 CH-5600 Lenzburg, Switzerland Telephone Fax Email Internet +41 (0)58 586 1419 +41 (0)58 586 1306 abbsem@ch.abb.com www.abb.com/semiconductors Doc. No. 5SYA 1622-03 Sep 05 |
Price & Availability of 5SMX12L2510
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |